Relevant Materials & Objects
- Air ducting
- ATMs
- Cable cars
- Carpets
- Cladding, brickwork and patios
- Escalators
- Exterior Window cleaning
- Fascias
- Ferrous and non ferrous metals
- Fireplaces
- Flooring - stone, 2 component paint, rubber, wood, parquet, bamboo, laminate, plastics, Ceramic tiles, Grouting
- Fuel-pumps
- Furniture, all sorts of material
- Interior walls
- Machined stainless steel, eg elevators
- Natural Stone - marble, granite, terrazzo, limestone etc.
- Natural wood
- Painted surfaces
- Plastics - frames, furniture, floors, electronic business automation etc.
- Public phone booths
- Railings
- Refrigerators and refrigeration-rooms
- Road signs
- Serving Counters
- Signage
- Smoking rooms/booths
- Statues & Monuments
- Street reflectors
- Sunblinds, Awnings
- Swimming pools and fountains - painted, plastic, tiled and crushed marble
- Ventilation filters and ducts
- Wall paper finishings
- Window exteriors
- Window frames - aluminium, plastic, painted, wood
Type of Soiling
- Bird droppings
- Chewing-gum on carpet
- Diesel
- Fats, Grease, Dirt
- Fingerprints
- Heating radiator stains on walls
- Nicotine
- Oil
- Pollution residues on building and fascias
- Rubber sole marks on flooring and walls
- Street grime
- Traffic film
- Tree resin
- Vehicle exhaust stains
Wet Silicon. NOT SUITABLE for adhesives (a solvent based product is required)
Recommended Dilution Ratios
These are approximate and are dependent on the degree of dirt.| Workshop, kitchen | 1:10 |
| Office areas | 1:20 |
| In machines - floor, carpet | 1:50 |
Directions for Use
Regular cleaning or Deep cleaning
Spray and wipe, rinse. For heavily soiled objects, allow Swiss EcoClean® time to soak.
For large surfaces, foaming gun and rinse, high- or low pressure, hot or cold water.
Carpet cleaning (spot cleaning)
To remove stains from carpets dilute Swiss EcoClean® in a solution of 1:20, spray onto spots and wipe with a clean, soft absorbent cloth.Carpet shampooing machine:
Vacuum thoroughly before shampooing . Use a solution of 1:50 – 1:30 in cleaning tank and shampoo carpet. Clean the carpet again with a dry absorbent cloth.Recommendation:
When using carpet cleaning machines, always fill with water first and then add Swiss EcoClean® to avoid excessive foaming. If necessary, add our Anti-Foam Additive.
Floor cleaning machine:
Use a solution of 1:50 – 1:30 in cleaning tank, depending on degree of dirt.Recommendation:
When using floor cleaning machines always fill with water first and then add Swiss EcoClean® to avoid excessive foaming. If necessary, add our Anti-Foam Additive.
Chewing gum on carpet
Pour concentrated Swiss EcoClean® on chewing gum residue stuck on carpet and allow to soak for a few minutes after which it can be removed easily.To clean stainless steel so that is has the same appearance as on the day it was installed, you simply need to spray Swiss EcoClean® 1:10-1:20 thoroughly onto the relevant stainless steel surface, thereafter, with a good quality microfiber cloth, wipe in the same direction as the stainless steel has been machined. This will have removed most of the contaminants. However it may be necessary to take a fresh microfiber cloth, moisten it with water and wipe over in the same direction to remove the remaining stripes. Swiss EcoClean® not only removes the fat and contaminants but also the oxidation layer on the immediate surface, leaving it looking as though it was brand new. This is what makes Swiss EcoClean® so special for stainless steel. See under Additives Stainless Steel Protection, to protect the stainless steel from fingerprints with a non- silicone based product, also leaving your fingers fat free after making contact with stainless steel surfaces.
Tunnel-film
See Traffic-film under heading Automobile. The tunnel contamination process is very similar.
Download
Supplementary Products
- EcoCalcis Concentrate – Decalcifier
- EcoGlas Concentrate - Glasscleaner
- EcoAir Fresh – Odour Neutraliser
- EcoInox
Accessoires
- Microfiber cloth
- Button activated Measuring system
Additives
- Oleum+
- Defoamer